"It's three machines in one!" the victor dcl is as simple to operate as a manual lathe. The x and z axis electronic handwheels allow you to jog the cross-slide just like a manual machine. The cnc screen acts as a sophisticated dro system with tool offset library and constant surface speed features. The third handwheel allows advanced manual machining of more complicated angles and curves. The victor dcl is the perfect machine for low quantity prototype turning work. The teach-in/playback feature allows you to quickly machine your first part using a combination of handwheels and or the graphic conversational machining guidance screens. While the first part is being machined, the teach-in function automatically converts all your machine movements and button presses into a g-coded program.; 10 hp, 3 phase main motor, 5- - 2500 rpms, 4 mt tailstock, 2.05" spindle hole, 18.1" swing over bed, 9.4" swing over cross slide; d1-6 camlock spindle type; equipped with a 10" buck 6-jaw adjust-tru chuck, an aloris ca tool post set, a small and a large steady rest".