FINISH PRO 25" METAL DRY TYPE BELT SANDER DEBURRER FINISHING MACHINE MODEL #FP-2560T SINGLE BELT HEAD 25" x 60" MANUFACTURED IN TAIWAN
Have one to sell?
ConditionNew
1 available
$19,850.00 USD
New
FINISH PRO 25" METAL DRY TYPE BELT SANDER DEBURRER FINISHING MACHINE MODEL #FP-2560T
Standard Features:
· Made in Taiwan
· Computerized programmable material thickness control
· Motorized Table Lift, with digital readout
· Variable Speed Conveyor
· Conveyor Forward & Reverse
· Belt Safety Overtravel Switches
· Electronic Eye Belt Tracking. Belt tracking adjusting lever ( Belt Trimmer ) to
Re-adjust the tracking system when running extremely out of parallel belts
· 4-Jackscrew Table Support
· Double Infeed & Outfeed Pinch Rolls with protective guards
· Conveyor Belt Tracking System
· Safety System with Disc Brake. Air operated disc brakes to stop sanding head in
3-5 seconds in the even of loss of air pressure or activation of any emergency stop device
· Table Height Digital Readout
· Load Meter indicates percentage of full motor loads
· Belt change door electrically interlocked for safety purpose
· Air tensioning of belt for accurate tensioning & compensation of belt stretch
· Quick release sanding head support for fast belt change
· Dust collection hood with 4” outlet is located adjacent to abrasive head in sanding area
· Emergency stops from almost any point
· Noise level bellows 80 dba
· Operation manual, control tags, danger signs, and warning labels in English on machine
· 208/230, 3-Phase, 440V/480V ,3phase is optional
· One year Industrial Warranty for parts
· We strongly recommend to use good dust collector for our Finish Pro, otherwise, the warranty will be void.
NOTE
§ Prices are for 208-230 VOLTS
§ Total amps 45 @ 230/3/60
§ COMPRESSED AIR REQUIRED: 2 CFM @ 90 PS
Other sizes available; Wet type available. Contact Marc @ (732) 390-0006 to inquire about free shipping!
OPTIONAL: WET DUST COLLECTORS use a water filled tank through which all grinding dust is pulled by a motor driven impeller fan. Particles sink to the base of the tank where they can easily be removed by raking into a provided container. Normal tap water is used, there are not filter bags to be changed. Water level is automatically controlled when unit is connected to a water supply. All units are equipped with explosion relief door and sound silencer.
This machine is compatible with a phase converter. Please note that the phase converter must be installed by GMC Machine Tools to ensure warranty coverage. Once the machine is received and the phase converter is installed by us, it will be ready for use. For more information or if you have any further questions or need assistance, feel free to contact us.
_______________________________________
Model FP-2560T
Max. Part Width 24”
Abrasive Belt Size 25” x 60”
Contact Roller Size 5” Dia.
Passline Height 31” – 37”
Thickness Capacity
Min. workpiece length
Max. workpiece weight
20Ga to max. 5-1/8” Min 12”, need a fixture for smaller parts 275LBS
Conveyor Drive Speeds 16-66 FPM
Infeed Conveyor Length 20”
Dust Collector Capacity
Outlet of dust hood 1,100 CFM 6”
Main Motor 10 HP, 230V , 3-Ph
Conveyor Motor 1 HP, 230V , 3-Ph
Table Lifting Motor 1/4 HP, 230V, 3-Ph
Amperage draw
Net Weight, approx.
Shipping weight, 45A on 220V, 25A on 440V 2,050 LBS 2,150 LBS
Machine Dimensions, LxWxH
Machine shipping dimensions, LWH 60” x 53” x 70” 60” x 53” x 73
FINISH PRO 25" METAL DRY TYPE BELT SANDER DEBURRER FINISHING MACHINE MODEL #FP-2560T
Standard Features:
· Made in Taiwan
· Computerized programmable material thickness control
· Motorized Table Lift, with digital readout
· Variable Speed Conveyor
· Conveyor Forward & Reverse
· Belt Safety Overtravel Switches
· Electronic Eye Belt Tracking. Belt tracking adjusting lever ( Belt Trimmer ) to
Re-adjust the tracking system when running extremely out of parallel belts
· 4-Jackscrew Table Support
· Double Infeed & Outfeed Pinch Rolls with protective guards
· Conveyor Belt Tracking System
· Safety System with Disc Brake. Air operated disc brakes to stop sanding head in
3-5 seconds in the even of loss of air pressure or activation of any emergency stop device
· Table Height Digital Readout
· Load Meter indicates percentage of full motor loads
· Belt change door electrically interlocked for safety purpose
· Air tensioning of belt for accurate tensioning & compensation of belt stretch
· Quick release sanding head support for fast belt change
· Dust collection hood with 4” outlet is located adjacent to abrasive head in sanding area
· Emergency stops from almost any point
· Noise level bellows 80 dba
· Operation manual, control tags, danger signs, and warning labels in English on machine
· 208/230, 3-Phase, 440V/480V ,3phase is optional
· One year Industrial Warranty for parts
· We strongly recommend to use good dust collector for our Finish Pro, otherwise, the warranty will be void.
NOTE
§ Prices are for 208-230 VOLTS
§ Total amps 45 @ 230/3/60
§ COMPRESSED AIR REQUIRED: 2 CFM @ 90 PS
Other sizes available; Wet type available. Contact Marc @ (732) 390-0006 to inquire about free shipping!
OPTIONAL: WET DUST COLLECTORS use a water filled tank through which all grinding dust is pulled by a motor driven impeller fan. Particles sink to the base of the tank where they can easily be removed by raking into a provided container. Normal tap water is used, there are not filter bags to be changed. Water level is automatically controlled when unit is connected to a water supply. All units are equipped with explosion relief door and sound silencer.
This machine is compatible with a phase converter. Please note that the phase converter must be installed by GMC Machine Tools to ensure warranty coverage. Once the machine is received and the phase converter is installed by us, it will be ready for use. For more information or if you have any further questions or need assistance, feel free to contact us.
_______________________________________
Model FP-2560T
Max. Part Width 24”
Abrasive Belt Size 25” x 60”
Contact Roller Size 5” Dia.
Passline Height 31” – 37”
Thickness Capacity
Min. workpiece length
Max. workpiece weight
20Ga to max. 5-1/8” Min 12”, need a fixture for smaller parts 275LBS
Conveyor Drive Speeds 16-66 FPM
Infeed Conveyor Length 20”
Dust Collector Capacity
Outlet of dust hood 1,100 CFM 6”
Main Motor 10 HP, 230V , 3-Ph
Conveyor Motor 1 HP, 230V , 3-Ph
Table Lifting Motor 1/4 HP, 230V, 3-Ph
Amperage draw
Net Weight, approx.
Shipping weight, 45A on 220V, 25A on 440V 2,050 LBS 2,150 LBS
Machine Dimensions, LxWxH
Machine shipping dimensions, LWH 60” x 53” x 70” 60” x 53” x 73
We use cookies to improve your experience. Privacy Policy.