GANESH GMV-3F HEAVY DUTY VERTICAL MILLING MACHINE WITH 10" x 54" TABLE VARIABLE SPEED WITH SQUARE WAYS

TABLE –

Table Size: 10” X 54” (254 mm X 1,372 mm)
T-slot width (3 Ground T-Slots on 2.5” centers) 5/8” (15.9 mm wide)
Table Height - surface to floor adjustment 37.4” – 52.8” (950-1,340 mm)
Table Load Maximum – for rated accuracy 440 pounds (200 Kg)
Table Load Capacity (Evenly Distributed) 950 pounds (430 Kg)
Table Load Capacity (Edge of Table) 400 pounds (181 Kg)

MACHINE TRAVELS & CAPACITY –

X - Table Travel / (With optional Power Feed) 35” (889 mm) / 30.3” (770 mm)
Y - Cross Travel 17.5” (444.5 mm)
Z - Knee Travel 15.05” (382.27 mm)
Ram Travel (Overarm) / Swivel 18.5” (470 mm) / 360°
Spindle Nose-to-Table Surface Travel 5.3” – 20.7” (135 – 525 mm)
Leadscrew ground pitch (X & Y) 0.2” per rev. (ballscrews optional)
Scale ring resolution in inches 0.001” (5 mm) (with adjustable zero position)
Ways – Hardened & Ground Dovetail Ways in X axis
Square Boxway in Y and Z axis

SPINDLE HEAD – Vari-Speed

Spindle Motor 3-HP, 3-Phase 220 vac (440 vac optional)
Spindle Taper – Hardened & Ground R-8
Spindle Runout 0.0002” maximum runout (0.005 mm)
Spindle Bearings ABEC-7 matched set Class-7 bearings
Variable Speed Drive - Dual Range 60 - 500 rpm (low-range) / 500 - 4500 rpm (high-range)

Head tilt (Left-to-Right) 90 – 0 – 90 degrees
Head tilt (Front-to-Back / Up-Down) 45 – 0 – 38 degrees
Head Swivel 360 degrees

Quill –

Quill Diameter 3-3/8” (85.725 mm)
Quill Travel Z2– Manual & Power Feed 5” (127 mm)
Quill feeds – With Trip Release - Inch 0.0015”, 0.003”, 0.006”
Quill feeds – With Trip Release - Metric 0.04 mm, 0.08 mm, 0.16 mm

DIMENSIONS & WEIGHT –

Power Requirements - 3-Phase Power 220 vac, 15 amps (440 vac optional)
Machine Weight 2,750 lbs. (1250 Kgs)
Machine Dimensions L x W x H 65” x 66” x 87”

Note: Machine is wired standard at 220V 3 phase. For 440V, machine needs to be ordered from Factory wired at 440 V. Otherwise, transformer is required.