SHARP RD 1600 RADIAL ARM DRILL

Description

SHARP RD 1600 RADIAL ARM DRILL, 63" Arm x 17" Column, with Box Table; 7 1/2" HP Main Motor, Coolant; 40 - 1920 RPM's; 5 Morse Taper Spindle, Power Clamping
FEATURES:
· Hardened and Ground Arm slide ways, gears
· Arm Elevation is controlled by a Hydraulic Motor
· Safety Device prevents the arm from dropping even when the copper nut is worn
· Counter-balanced spindles (with casting) increase durability
· Spindle depth setting with automatic kick-out
· T-Slots and Drain Channels on the table and base casting
· Auto-reverse tapping function

STANDARD EQUIPMENT:
· Box Table
· Coolant System
· Work light.
· Toolbox
· Wired 220V or 440V. Please Specify.

SPECIFICATION:

Diameter of column 17"
Distance from column surface to spindle center, max. 63"
Distance from column surface to spindle center, min. 13-3/8"
Travel of the spindle head 49-5/8"
Distance from base surface to spindle end, max. 63"
Distance from base surface to spindle end, min. 13"
Elevating the height of the arm 35-7/16"
Effective area of the table 27-5/8"x19-5/8"x15-3/4"
Dimensions of the base 97-5/8"x41-11/32"x8-1/4"
Taper hole in the spindle #5 MT
Stroke of the spindle 14-9/16"
R.P.M. of spindle (rpm range x steps) 40-1920 x 12 Steps
Feed of spindle (1PR x steps) 0.003"-0.038" x 6 Steps
Main motor (HP) 7 ½ HP
Elevating motor (HP) 2 HP
Clamping motor for column and gearbox (HP) 1 HP
Clamping motor for arm (HP) ½ HP
Coolant pump (HP) 1/8 HP
Machine height from floor, max. 124-56/64"
Measurement (LxWxH) / floor space 103"x45"x105"
Measurement (LxWxH) / shipping dimensions 110”x57”x115”
Shipping weight 10,340 Lbs.
Cast Iron
Drilling 2-5/8"
Capacity Tapping 2-3/8"
Boring 7-3/8"
Steel
Drilling 2-1/4"
Capacity Tapping 2"
Boring 5"

Total Power Consumption
¨ 220V 12KVA/35 amps
¨ 440V 12KVA/17.5 amps