ACRA 1440SVS VARIABLE SPEED GEAR HEAD ENGINE LATHE INCH METIC FULLY TOOLED MFG. IN TAIWAN NEW
Have one to sell?
ConditionNew
1 available
$16,500.00 USD
New
ACRA 1440SVS VARIABLE SPEED GEAR HEAD ENGINE LATHE INCH METIC FULLY TOOLED MFG. IN TAIWAN
Acra SVS Precision AC Vari-Speed Engine Lathe - 1440SVS
Features:
Made In Taiwan
BED
One Piece Casting Base
Quality Cast Iron FC30 with Vibration Relieved Stress
Induction Hardened And Precision Ground 5HP (3.75Kw) 3-Phase High Frequency Motor
Foot Brake
Emergency Stop Button
Jogging Switch Button
SPINDLE
Electronic Infinitely Variable Speed With A.C. Inverter
Supported by 2 Taper Roller Precision Bearings
Camlock D1-4 Spindle Nose
0.38mm (1 1/2") Spindle through Hole
UNIVERSAL GEAR BOX
Complete Threading Range: 40 Imperial threads And 37 Metric Threads
Easier Lubrications With enclosed Gearbox
HEAD STOCK
2 Headstock Gear Speed Ranges
Electronic Control Panel With RPM Display, Light Indicator For High+Low Speed Ratio, Speed Control Electric Knob, Emergency Switch And Motor Start Push Button.
APRON AND SADDLE
Automatic Feed And Threading, Fully Interlocked
Saddle And Top Slide Locking System
Forward-Off-Reverse Lever
4 Way Tool Post
T Slot Compound
TAILSTOCK
Rigid Construction And Super Tight Clamp
Morse Taper No.3 Internal Taper
Hardened and Ground Tang Quill
CAPACITY
Swing Over Bed: 14"
Swing Over Cross Slide: 8-5/8”
Swing In Gap: 20"
Distance Between Centers: 40"
Bed Width: 8-1/2”
HEADSTOCK
Spindle Nose: D1-4
Spindle Bore: 1-1/2”
Taper of Spindle: MT NO.5
Spindle Speeds - Steps Variable Speed 2 step
Spindle Speeds - Range 30 ~ 2500 RPM
CARRIAGE
Cross Slide Travel: 6 1/2"
Compound Slide Travel: 4”
THREADS & FEEDS
Inch Threads: 1~56 TPI
Metric Threads: 0.45 ~ 7.5 mm
Longitudinal Feeds: 0.0011 ~ 0.0543"/rev
Cross Feeds: 0.0003 ~ 0.0181"/rev
TAIL STOCK
Quill Diameter: 1-9/16"
Quill Travel: 4-3/4”
Quill Taper: MT NO.3
POWER
Spindle Drive Motor: 5 HP
Voltage: 220 / 440V AC / 3 PH
MACHINE WEIGHT & DIMENSION
Net Weight: 1,635 LBS
Shipping Weight: 2,000 LBS
Dimension (LxWxH): 71" x 32" x 51"
ACRA 1440SVS VARIABLE SPEED GEAR HEAD ENGINE LATHE INCH METIC FULLY TOOLED MFG. IN TAIWAN
Acra SVS Precision AC Vari-Speed Engine Lathe - 1440SVS
Features:
Made In Taiwan
BED
One Piece Casting Base
Quality Cast Iron FC30 with Vibration Relieved Stress
Induction Hardened And Precision Ground 5HP (3.75Kw) 3-Phase High Frequency Motor
Foot Brake
Emergency Stop Button
Jogging Switch Button
SPINDLE
Electronic Infinitely Variable Speed With A.C. Inverter
Supported by 2 Taper Roller Precision Bearings
Camlock D1-4 Spindle Nose
0.38mm (1 1/2") Spindle through Hole
UNIVERSAL GEAR BOX
Complete Threading Range: 40 Imperial threads And 37 Metric Threads
Easier Lubrications With enclosed Gearbox
HEAD STOCK
2 Headstock Gear Speed Ranges
Electronic Control Panel With RPM Display, Light Indicator For High+Low Speed Ratio, Speed Control Electric Knob, Emergency Switch And Motor Start Push Button.
APRON AND SADDLE
Automatic Feed And Threading, Fully Interlocked
Saddle And Top Slide Locking System
Forward-Off-Reverse Lever
4 Way Tool Post
T Slot Compound
TAILSTOCK
Rigid Construction And Super Tight Clamp
Morse Taper No.3 Internal Taper
Hardened and Ground Tang Quill
CAPACITY
Swing Over Bed: 14"
Swing Over Cross Slide: 8-5/8”
Swing In Gap: 20"
Distance Between Centers: 40"
Bed Width: 8-1/2”
HEADSTOCK
Spindle Nose: D1-4
Spindle Bore: 1-1/2”
Taper of Spindle: MT NO.5
Spindle Speeds - Steps Variable Speed 2 step
Spindle Speeds - Range 30 ~ 2500 RPM
CARRIAGE
Cross Slide Travel: 6 1/2"
Compound Slide Travel: 4”
THREADS & FEEDS
Inch Threads: 1~56 TPI
Metric Threads: 0.45 ~ 7.5 mm
Longitudinal Feeds: 0.0011 ~ 0.0543"/rev
Cross Feeds: 0.0003 ~ 0.0181"/rev
TAIL STOCK
Quill Diameter: 1-9/16"
Quill Travel: 4-3/4”
Quill Taper: MT NO.3
POWER
Spindle Drive Motor: 5 HP
Voltage: 220 / 440V AC / 3 PH
MACHINE WEIGHT & DIMENSION
Net Weight: 1,635 LBS
Shipping Weight: 2,000 LBS
Dimension (LxWxH): 71" x 32" x 51"
We use cookies to improve your experience. Privacy Policy.